15 Shot Fanned Mortar Rack

This is our 15 shot fanned firework mortar rack. This rack comes with HDPE tubes and the tubes are plugged with a 1 1/2 inch wood plugs. This rack can be found at manmfireworks.com.

Facebook Fan Page

If you like fireworks make sure you head on over to our facebook fan page. https://www.facebook.com/MAnMFireworkMortarRacksAndMortarTubes
Happy shooting,
Be Safe

Safety Tip

Alright your firework safety tip of the week. When you are shotting any kind of cake 200 gram or 500 gram make sure that it is secured or supported so
that it won't fall over. If you have more then one cake you can use duct tape to tape them all together so that they are secure. Make sure that you place the cake
on a hard surface. This can help support it. A good way to support a single cake is to place a brick, rock or somthing similar on each side of the cake to help
hold it up right. Another good way that I use, is to use liquid nails heavy duty adhesive to hold the cake to plywood. You do this by first cutting the paper
off the bottom of the cake. Then you apply the HEAVY DUTY liquid nails to the bottom of the cake. After that is done you place the cake on the plywood
and you let it sit and dry. Make sure you use the HEAVY DUTY liquid nails because the other kinds are not strong enough to hold the cake down to the
plywood.

Our pyrotechnic mortar racks

Here is a video about the racks that we sell.
http://www.youtube.com/watch?v=OTgca_lq6GY