Firework Safety Starts with Common Sense

Firework Safety Starts with Common Sense Tips 
Always remain standing when using sparklers.
    Never hold a child in your arms when using sparklers.
    Never light, more than one sparkler at a time.
    Never throw sparklers.
    Sparkler wire and stick remain hot after the flame has gone out.  Be sure to put the  spent sparklers in a bucket of water.
    Teach children not run while holding sparklers.
www.manmfireworks.com

What not to do with fireworks. (Idiot)

Why in the world would someone think this is ok.
www.manmfireworks.com

5 Shot Firework Mortar Rack

20 Shot Firework Mortar Rack

This 20 shot mortar rack is constructed from 5/8. Has 20 HDPE mortar tubes. Plugged with 1.5" pine plugs
www.manmfireworks.com

fireworks Stash 2014! Black Friday! Funny

Black Friday

http://www.manmfireworks.com/#!specials

Firing System

Our new product is here. We will be putting the DB06R 6 cue firing system on our site. We will keep you up to date with pricing.
Have a good weekend be safe.
Let Us Help You Light Up The Sky 
www.manmfireworks.com 

New Product

We will be revealing our new product soon.

www.manmfireworks.com

More Firework Tips

    Store fireworks in a cool, dry place
    Always read and follow the directions on the label
    Always have an adult present when handling fireworks
      Use fireworks outdoors in a safe, non-wooden area
    Having a working garden hose or bucket of water handy
    Keep everyone a safe distance away from fireworks
    Never re-ignite a firework that doesn’t light the first time or one that has finished its display
    Never carry fireworks in your pocket
    Don’t throw fireworks at anything
    Keep pets indoors and away from fireworks
    Never shoot fireworks in metal or glass containers
    Keep spectators at a safe distance
    Always wear safety glasses when igniting fireworks

    Never place any part of your body that you aren't willing to lose, over a mortar tube.
    Never look directly into a mortar tube to check it.
    If possible, avoid reloading mortar tubes that have just been fired. If you must reload a mortar tube that has recently been fired, turn the tube upside down first to dump out any hot debris that may be remaining in the bottom before reloading it.
    The paper mortar tubes that are supplied with many shell kits should only be used with the number of shells that were originally contained in the kit. Fiberglass and black HDPE (high-density polyethylene) mortars are much stronger and longer lasting and should be used whenever possible.
www.manmfireworks.com

2013 Firework Show

Here is our 2013 firework show. Enjoy!
http://www.manmfireworks.com

Blown Up Firework Mortar Rack

You don't want your  mortar rack to look like this when you are finished.
http://www.manmfireworks.com

More Firework Safety Tips

RELOADABLE TIPS.

Never use a wet or damaged launch tube.  Insert the shell all the way to the bottom of the launch tube, flat end down.  If you are using a cylindrical shell, make sure the arrow is pointed up.  Never force a shell into a tube.  Use only one shell at a time.  Never load a shell into a smouldering tube.  Never ignite a shell outside of a launch tube.  Never relight a fuse that fails to ignite a shell on the first try. 

TIPS WITH ANIMALS. 

Be careful using fireworks around animals.  Often the noise and lights of fireworks frighten animals.  Keep animals inside during your use of fireworks, and warn your neighbors that you are about to use fireworks, so they can properly protect their animals.

DON'T TRANSPORT FIREWORKS ON AIRPLANES.

It is a violation of federal law to transport fireworks on airplanes.  Please do not attempt to do so.

http//:www.manmfireworks.com

9" Firework Mine HDPE Mortar Tube

This is our 9" mine mortar tube. It is not ment to be used with aerial shells. The tube being only 9" helps the mine shell have a bigger spread then the shell leaves the tube. Our mine shells are made of HDPE and have a 1.5" wood plug.
http://www.manmfireworks.com

What NOT To Do With Fireworks

What you do NOT do with fireworks.
www.manmfireworks.com

More Firework Safety Tips

Always light fireworks on a hard, flat and level surface to insure the stability of the product. Use the fireworks in a clear open space away from buildings and vehicles. Never smoke when handling fireworks. Store fireworks in a cool, dry place. Always read and follow label directions, warnings, and instructions. Only ignite fireworks outdoors. Never try to relight fireworks that have not fully functioned. Dispose of spent fireworks properly.

www.manmfireworks.com

4th Of July Is Right Around The Corner Here Are Some Firework Safety Tips

The 4th of July is right around the corner. So we wanted to give you some safety tips.

If you give kids sparklers, make sure they keep them outside and away from the face, clothing, and hair. Sparklers can reach 1,800° Fahrenheit. Buy only legal fireworks. Always use fireworks outside and have a bucket of water or a hose nearby in case of accidents. Don't hold fireworks in your hand. Point fireworks away from homes, and keep away from brush and leaves and flammable substances. Never relight a dud. Do not consume any alcohol while lighting fireworks. Fireworks must be used only by individuals who act in a responsible manner.www.manmfireworks.com

Mortar Rack Sleeve Giveaway

Head over to YouTube and try to win a free mortar rack sleeve. Just click the link. http://www.youtube.com/watch?v=PSBokLcGQZw

Use fireworks safely

This should never happen if you use fireworks in a safe manor. So please read all firework safety tips on our blog, and other sites online.

LIKE US ON FACEBOOK

Summer Firework Safety Tips

      With the summer and the 4th of July coming. Everyone will be using fireworks. Fireworks can make any celebration fun. Fireworks also have the potential to make them every bad. So it is very important that you take all the safety precautions. To avoid a tragedy. When using cakes or multi shot fireworks. Make sure that the cake is in a bucket or supported by blocks or something similar. Make sure that no one picks up or touches the fireworks after the show. Be sure to give the fireworks adequate time to cool off. Be sure that there is enough space between you audience and other obstacles. http://www.manmfireworks.com 

   Like us on Facebook

Excals or black mamba

Let us know what you like.
http://www.manmfireworks.com

Our HDPE Firework Mortar Tubes

http://www.manmfireworks.com

Our Racks

ManM Fireworks  mortar racks are made to last for years. Which Rack should I buy?
 This depends on what part of the show you wish to use it in, and what kinds of shells you are using.
More Hints and Tips To Come
http://www.manmfireworks.com

Empty 5 Shot Firework Mortar Rack

HDPE Firework Mortar Tube With Base.

Our HDPE firework mortar tube with base is perfect for the new pyro. If you are new the to fireworks hobby just adding these HDPE firework mortar tubes can make your show safer. All our tubes come with a 1.5" plug. The plugs are pressed in and held in with 4 staples. The firework mortar tube  is made of HDPE. The mortar tube comes with a big strong base for added stability.
Http://www.manmfireworks.com

What Mortar Tubes Should I Buy

What mortars should I buy?
There are two sizes for consumer Fireworks DR-9 (1.81" ID) and DR11 1.91" ID). The DR 11 mortars are the most common size and can be used with all 1.75" consumer mortar shells. The DR9 is used for festival balls.
 Http://www.manmfireworks.com

Why Use HDPE For Firework Mortar Tubes

HDPE is the safest material to use for making firework mortars. It is tough, and can take a lot of abuse and firings, and can last a lifetime. If a fireworks shell explodes in an HDPE mortar, there are few, if any, sharp-edged pieces of shrapnel to injure people. That's because HDPE doesn't shatter--it shreds and tears. ManM Fireworks mortar tubes are plugged with a 2 inch thick wooden plug.
More Hints and Tips to come
http://www.manmfireworks.com

How Long Will My Firework Mortar Tubes Last

Your mortar tubes should last a life time. You may have to replace the plug lated down the road ,but the mortar tubes should last a life time.
More Hints and Tips To Come
http://www.manmfireworks.com

30 Shot Firework Mortar Rack

http://www.manmfireworks.com

How To Fuse Firework Shells Together

Safety Tips

1. Never smoke when handling chemicals or compositions.
2. Be sure you are familiar with all the properties of the compositions you work with. Find out as much as      you can about other people’s experiences with a particular mixture.
3. Use only non-sparking tools. Make your tools from either: wood, paper, aluminum, lead or brass. Other metals and materials may spark (especially steel will).
4. Paper bags or wooden containers are good to use for storing mixed compositions. Store compositions dry and cool. Avoid plastics, glass and metal. Avoid storing compositions in general.
   Make as much as you will need in the near future and keep no more in stock than necessary.
 5. Never have large amounts of composition near you. If you must use larger amounts of composition in multiple items, store the bulk
of composition in a safe place and bring only small amounts to your working place. Finished items should also be brought to a safe place immediately
http//:www.manmfireworks.com

Firework Mortar Tube

http://www.manmfireworks.com

Firework Safety

1. Never allow young children to play with or ignite fireworks.
2. Avoid buying fireworks that are packaged in brown paper because this is often a sign that the fireworks were made for professional displays or homemade.
3. Always have an adult supervise firework activities. Parents don't realize that young children suffer injuries from sparklers. Sparklers burn at temperatures of about 2,000 degrees.
4. Never place any part of your body directly over a fireworks device when lighting the fuse. Back up to a safe distance immediately after lighting fireworks.
5. Never try to re-light or pick up fireworks that have not ignited fully.
6. Never point or throw fireworks at another person.
7. Keep a bucket of water or a garden hose handy in case of fire.
8. After fireworks complete their burning, douse the spent device with plenty of water from a bucket or hose before discarding it to prevent a trash fire.
http://www.manmfireworks.com

Firework Mortar Tube Info

Mortars are the tubes with plugged ends that fireworks shells, comets or mines are fired from.
Mortars can be made of HDPE plastic, fiberglass, paper, or in some special cases, metal.
The mortars need to be secured in an upright and safe position.
This can be done by burying the mortars (guns) about 2/3 of their length in the ground.
Smaller mortars can be securely held in place in racks, either perpendicularly or at an angle.
The racks can be constructed of wood.
       There are two sizes for consumer mortars DR-9 (1.81" ID) and a DR-11 (1.91" ID). The DR11 mortars are the most common size and can be used with all consumer shells. The DR9 is used for festival balls
        Fireworks that are launched into the air typically are fired out of mortar tubes. Many tubes that come with consumer fireworks are not reusable or are made out of flimsy cardboard. This is why many pyrotechnic enthusiasts use mortar tubes made from HDPE .
High Density Polyethylene (HDPE) is the safest material you can use when making mortars for fireworks. While the HDPE tubing itself offers durability and has the ability to withstand higher levels of shock and heat.

Phantom Fireworks Fuse Demo

Phantom fireworks fuse test. We got some fuse from phantom and wanted to do a demo to show everyone. So click the link and check it out. Please like and subscribe.
www.manmfireworks.com

Fusing Tips

Fusing
Here are some tips on fusing shells together.

1. Cut the fuse going to the shell on an angle.
2. Attach the fuse to the main fuse so that it is going in the same direction as the fire.
3. Attach the fuse with masking tape or a paper like tape.

(I use zip ties and masking tape when fusing my shells together.)
       4. Make sure on canister shells the fuse is on the top of the shell when you are putting it in the tube.
       5 On ball shells make sure the fat part of the shell is toward the top of the tube.
       6. Look at the shell and make sure that nothing has been tampered with. If you notice it has been tampered with do not use.
www.manmfireworks.com

What Is The Legal Size For Class C Fireworks

What is the maximum amount of  composition material in a Class C Firework
The legal limit of explosive material in a consumer ( Class C) firework is 60 grams of composition. Any item containing more than 60 grams is illegal and should be avoided. It really doesn't matter what the diameter of the item is.
How can I recognize an illegal firework?
Look for a manufacturer's name on each item or on the box in which they were packaged. Each device should also list instructions for proper use and have cautionary labeling. The manufacturer's name and cautionary labeling are required by law. Fireworks without this information are probably illegal. You should avoid all fireworks like this.
 M-80s, M-100s, and silver salutes are some examples of illegal explosives, sometimes referred to by the press as legal, consumer fireworks. These items are extremely dangerous. NEVER attempt to make your own fireworks if you do not know what you are doing. Do not tamper with legal consumer fireworks. Be extremely careful when ordering fireworks over the Internet. If you do use the Internet to get your fireworks be sure that you are purchasing from a legal vendor.
www.manmfireworks.com

Our Firework Mortar Racks

Click the link below to learn more about our firework mortar racks.
http://www.youtube.com/watch?v=OTgca_lq6GY

How To Fuse Firework Shells

8" Or 12" Firework Mortar Tubes

Should I use 8” or 12” firework mortar tubes for mine shells? You can use either 8” or 12” tubes if you use an 8” tube the mine shell will have a wider break when it leaves the firework mortar tube, but if you already have 12” mortar tubes you can use them. The break just won’t be as wide with a 12” tube verses an 8” mortar tube. Hope theses helps all you pyros.

Thanks for reading
http://www.manmfireworks.com

Firework Cake Safety (200 gram 500 gram)

Alright your firework saftey tip. When you are shooting any kind of cake 200 gram or 500 gram make sure that it is secured or supported so that it won't fall over. If you have more then one cake you can use duct tape to tape them all together so that they are secure. Make sure that you place the cake on a hard surface. This can help support it. A good way to support a single cake is to place a brick, rock or somthing similar on each side of the cake to help hold it up right. Another good way that I use, is to use liquid nails heavy duty adhesive to hold the cake to the plywood. You do this by first cutting the paper off the bottom of the cake. Then you apply the HEAVY DUTY liquid nails to the bottom of the cake. After that is done you place the cake on the plywood and you let it sit and dry. Make sure you use the HEAVY DUTY liquid nails because the other kinds are not strong enough to hold the cake down to the plywood.
http://www.manmfireworks.com

Artillery Shell Safety

All right guys here are your safety tip for this week. We will be talking about artillery shells, also known as reloadable shells. When you are placing the shells in the tube make sure you are putting them in with the top up. How do you do that? Well there are different ways to tell if the shell is in right. On ball shells the fat part of the shells goes towards the top and the skinny part goes towards the bottom of the tube. On most ball shells the fuse will come out of the bottom of the shell and loop up to the top through a string. Where the fuse comes out make sure that part is on the bottom. On most canister shells it is much easier to tell the top from the bottom. When you are looking at a canister shell the fuse will come out of the top of the shell. So when you are putting the shell in the mortar tube make sure that part is towards the top of the tube. Next week we will be talking mortar tubes so stay tuned.
Happy shooting
Be safe
http://www.manmfireworks.com

What size Mortar Tube Is Right For Me

What size mortar tube should I buy 15" or 12"? Well you should buy 12". Why should I use 12" tubes? There are alot of shells out there that the fuse is only long enough for a 12" tube. You could put those shells in a 15" tube, but it is more difficult to fuse the shells together. People say that the shells go higher if you use a 15" tube. We have used both size tubes. We do not see any difference in how high the shells go in the air. We do find it much easier to work with 12" tubes. All the fuse on your shells will work with 12" tubes. Your shells will go just as high with a 12". The biggest thing is that you will save money when you buy 12" tubes.
This is just our opinion. We hope this helps all you guys that have questions about what size tubes to use.
http://www.manmfireworks.com

ManM Fireworks Is On YouTube

ManM Fireworks is on youtube. Head over to http://www.youtube.com/user/manmfireworks and take a look at some over our products. If you see any thing you like it can be found at http://www.manmfireworks.com. If you have any questions please email us at manmfireworks@yahoo.com

Be Safe

15 Shot Fanned Mortar Rack

This is our 15 shot fanned firework mortar rack. This rack comes with HDPE tubes and the tubes are plugged with a 1 1/2 inch wood plugs. This rack can be found at manmfireworks.com.

Facebook Fan Page

If you like fireworks make sure you head on over to our facebook fan page. https://www.facebook.com/MAnMFireworkMortarRacksAndMortarTubes
Happy shooting,
Be Safe

Safety Tip

Alright your firework safety tip of the week. When you are shotting any kind of cake 200 gram or 500 gram make sure that it is secured or supported so
that it won't fall over. If you have more then one cake you can use duct tape to tape them all together so that they are secure. Make sure that you place the cake
on a hard surface. This can help support it. A good way to support a single cake is to place a brick, rock or somthing similar on each side of the cake to help
hold it up right. Another good way that I use, is to use liquid nails heavy duty adhesive to hold the cake to plywood. You do this by first cutting the paper
off the bottom of the cake. Then you apply the HEAVY DUTY liquid nails to the bottom of the cake. After that is done you place the cake on the plywood
and you let it sit and dry. Make sure you use the HEAVY DUTY liquid nails because the other kinds are not strong enough to hold the cake down to the
plywood.

Our pyrotechnic mortar racks

Here is a video about the racks that we sell.
http://www.youtube.com/watch?v=OTgca_lq6GY